Natural Gas Power Plant Operations & Maintenance

Explain how gas-fired plants operate and how operating choices affect maintenance.

Request this courseView course content
8 hours of contentOne full day or flexible segments
Live online trainingIn-person delivery also available
Tailored for youTopics aligned to your priorities. Information customized to your company.

Course overview

Build a practical understanding of gas-fired electric generation, with emphasis on simple-cycle and combined-cycle plants. Trace fuel, air, steam, water, and electrical power through the equipment, then connect those flows to plant performance and maintenance needs.

Explore operating modes, system dependencies, condition monitoring, outage planning, and the effects of cycling. Discussion connects engineering and maintenance decisions to safe, reliable operation using plant-specific procedures and manufacturer guidance as the operating authority.

Learning objectives

  • Explain how gas turbines, heat-recovery systems, and steam turbines produce electricity.
  • Connect supporting systems and controls to plant availability and efficiency.
  • Recognize how starts, loading, fuel conditions, and equipment condition influence maintenance.
  • Discuss outage preparation, performance trends, and lifecycle improvement priorities.

Who should attend

Utility generation employees, plant support engineers, maintenance planners, project and asset managers, operations support staff, and professionals who work with gas-fired generating facilities.

How gas plant operation shapes maintenance

Trace the process

Plant configuration determines how equipment converts fuel into electrical output.

Support the operation

Operators manage changes in output within the equipment’s limits.

Maintain the assets

Operating history and equipment condition inform maintenance priorities.

Course content

Plant configurations and performance measures

  • Compare simple-cycle, combined-cycle, cogeneration, and gas-engine applications.
  • Trace energy conversion through Brayton and Rankine cycle concepts without detailed design calculations.
  • Distinguish gross and net output, heat rate, efficiency, availability, and capacity factor.
  • Understand the effects of ambient conditions, auxiliary demand, part-load operation, and dispatch duty.

Gas turbine and fuel systems

  • Compressor, combustion system, turbine, bearings, lubrication, and inlet and exhaust paths.
  • Natural-gas supply, pressure, quality, conditioning, and the interface with pipeline availability.
  • Frame and aeroderivative turbine applications; inlet cooling and power augmentation concepts.
  • Connect combustion stability, fouling, hot-section exposure, and equipment limits to performance.

Heat recovery and the steam cycle

  • Follow exhaust heat through an HRSG, including economizer, evaporator, and superheater functions.
  • Pressure levels, drums, reheating, supplementary firing, and their operational implications.
  • Steam turbine, condenser, feedwater, condensate, and cooling system relationships.
  • Recognize thermal stress, water quality, steam purity, and condensate conditions as reliability concerns.

Electrical systems, controls, and auxiliaries

  • Generator, excitation, synchronization concepts, step-up transformer, and plant electrical distribution.
  • DCS functions, instrumentation, permissives, alarms, trips, and protective interlocks.
  • Cooling water, air systems, lubrication, emergency power, and fire detection and protection interfaces.
  • Read simplified process and one-line diagrams to identify dependencies and single points of failure.

Operating modes and environmental interfaces

  • Discuss startup categories, loading, shutdown, standby, and layup at a conceptual level.
  • Understand ramping and minimum-load constraints and coordination with the system operator.
  • NOx and CO control concepts, emissions monitoring, water use, and permit-related operating limits.
  • Recognize when changing conditions require escalation under plant procedures rather than improvised action.

Condition monitoring and maintenance strategy

  • Preventive, predictive, corrective, and reliability-centered maintenance approaches.
  • Use vibration, temperatures, oil condition, inspections, and performance trends to identify deterioration.
  • Relate operating hours, starts, trips, fuel, and duty severity to OEM maintenance planning.
  • Coordinate turbine, HRSG, steam-system, generator, and auxiliary maintenance requirements.

Outage planning and work execution

  • Define scope from inspections, defect history, technical recommendations, and operating priorities.
  • Plan parts, specialist services, tooling, work packages, schedule dependencies, and contingency allowances.
  • Coordinate isolation, permits, contractor interfaces, quality controls, and documentation through approved processes.
  • Track findings, scope changes, completion evidence, and readiness for controlled return to service.

Reliability improvement and lifecycle planning

  • Separate equipment degradation from ambient and operating effects when reviewing heat-rate trends.
  • Investigate forced outages and recurring defects using evidence and root-cause methods.
  • Evaluate efficiency improvements, flexibility upgrades, spares, and major component replacement.
  • Balance reliability, cost, outage duration, emissions constraints, and expected future operating duty.

Course recap & participant questions

Review the main concepts, connect them to your work, and discuss questions and other topics of interest to your team.

Agenda

8:00 a.m.–5:00 p.m., including eight hours of instruction, two 15-minute breaks, and a 30-minute lunch.

Morning

  • 8:00–8:45 a.m.
    Plant configurations and performance measures
  • 8:45–9:45 a.m.
    Gas turbine and fuel systems
  • 9:45–10:00 a.m.
    Break
  • 10:00–11:15 a.m.
    Heat recovery and the steam cycle
  • 11:15 a.m.–12:15 p.m.
    Electrical systems, controls, and auxiliaries
  • 12:15–12:45 p.m.
    Lunch

Afternoon

  • 12:45–1:45 p.m.
    Operating modes and environmental interfaces
  • 1:45–2:30 p.m.
    Condition monitoring and maintenance strategy
  • 2:30–2:45 p.m.
    Break
  • 2:45–3:45 p.m.
    Outage planning and work execution
  • 3:45–4:45 p.m.
    Reliability improvement and lifecycle planning
  • 4:45–5:00 p.m.
    Course recap & participant questions

Planning your course

How is pricing structured?

We quote one course fee for your organization, with no per-person charge. Share your preferred dates and delivery format when requesting a quote.

How is the course delivered?

Live online through Teams or your preferred platform. In-person training is also available.

Can we divide the course into shorter sessions?

Yes. Eight instructional hours can be delivered in two four-hour sessions or other agreed segments. Breaks are scheduled separately from instructional time.

Can the course focus on our plant configuration?

Yes. The balance of simple-cycle, combined-cycle, and supporting-system topics can be adjusted to your assets and the experience of the audience.

Does this replace operator or maintenance qualification?

No. This is a systems and decision-focused course, not authorization to operate, isolate, repair, or commission equipment. Plant procedures and manufacturer requirements remain controlling.

Can we tailor the topics to our organization?

Yes. We can adjust the balance of topics and use approved company examples, regional practices, and the questions your team wants to address.

How do we get started?

Share your organization, audience, goals, preferred format, and timing. We will confirm the course scope and arrangements in the proposal.

Straightforward group pricing

One course fee. Your whole team.

Your organization pays one course fee with unlimited attendees at no extra cost.

Live online training

$7,000

Typical fee for a one-day course delivered live online to your team.

In-person training

$9,000

Typical fee for a one-day course at your organization.

Request a proposal to confirm the fee, agenda, and delivery arrangements for your training.

Request quote

Bring the discussion to your team.

Discuss Natural Gas Power Plant Operations & Maintenance for your organization. Tell us who will attend and the priorities you want to address.

Request this courseRead participant reviews